View QD15TL02_7753821.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

qd15 t l 0203 page /26 1 quanta display inc . doc no. qd15 t l 0203 - 00 prepared date : 11 / 30 /200 4 doc. rev.: 00 issue date: 02 / 14 /200 5 preliminary specification quanta display inc. specification rohs compliant ? approval by . qua nta display inc. specification for tft lcd module model no. qd15 t l0 2 rev.:03 free datasheet http://www..net/
qd15 t l 0203 page /26 2 quanta display inc . these specification sheets are the proprietary product of quanta display inc. (?qdi?) and include materials protected under copyright of qdi. do not reproduce or cause any third party to reproduce them in any form or by any me ans, electronic or mechanical, for any purpose, in whole or in part, without the express written permission of qdi. the device listed in these technical literature sheets was designed and manufactured for use in oa equipment. in case of using the device for applications such as control and safety equipment for transportation (aircraft, trains, automobiles, etc.), rescue and security equipment and various safety related equipment which require higher reliability and safety, take into consideration that app ropriate measures such as fail - safe functions and redundant system design should be taken. do not use the device for equipment that requires an extreme level of reliability, such as aerospace applications, telecommunication equipment (trunk lines), nuclea r power control equipment and medical or other equipment for life support. qdi assumes no responsibility for any damage resulting from the use of the device, which does not comply with the instructions, and the precautions specified in these technical lit erature sheets. contact and consult with a qdi sales representative for any questions about this device. free datasheet http://www..net/
qd15 t l 0203 page /26 3 quanta display inc . revision history rev. date ecn no. change content 0 11 / 30 /200 4 n/a preliminary s pecification initiat ion free datasheet http://www..net/
qd15 t l 0203 page /26 4 quanta display inc . 1. application this specification applies to a color tft - lcd module, qd15 t l0 2 . 2. overview this module is a color active matrix lcd modu le incorporating amorphous silicon tft (thin film transistor). it is composed of a color tft - lcd panel; driver ics, control circuit and power supply circuit and a backlight unit. graphics and texts can be displayed on a 1 280 3 800 dots panel with 262,144 c olors by using lvds ( l ow v oltage d ifferential s ignaling) to interface and supplying +3.3v dc supply voltage for tft - lcd panel driving and supply voltage for backlight. the tft - lcd panel used for this module has very high aperture ratio. a low - reflection an d higher - color - saturation type color filter is also used for this panel. therefore, high - brightness and high - contrast image, which is suitable for the multimedia use, can be obtained by using this module. optimum viewing direction is 6 o'clock. [f eatures] 1) high aperture panel; high - brightness or low power consumption. 2) brilliant and high contrast image. 3) small footprint and thin shape. 4) light weight. 5) wide screen 15.4 ? wxga 6) rohs compliant 3. g eneral specifications parameter specifications unit display size 390.1 ( 15 .4 ? ) diagonal mm active area 331.2 2 07.0 mm pixel format 1 280 (h) 800 (v) pixel (1 pixel = r+g+b dots) pixel pitch 0.2588 (h) 0.2 588 (v) mm pixel configura tion r, g, b vertical stripe display mode normally white unit outline dimensions (typ.)*1 344. 0 (w) 2 22.0 (h) 6.35(t)max. mm mass 585 max. g surface treatment anti - glare ; hardness 3h; low reflection (~5%) *1.note: excluding backlight c ables. outline dimensions are shown in this specification . free datasheet http://www..net/
qd15 t l 0203 page /26 5 quanta display inc . 4. input terminals 4 - 1. tft - lcd panel driving cn1 (1 channel, lvds signals ? nsc/ti standard and +3.3v dc power supply) using connector: fi - xb30sx - hfxx/fi - x30sx - hfxx/equivalent (jae) interfa ce cable pin assignments pin no . symbol function 1 vss ground 2 vdd power supply, 3.3 v (typical) 3 vdd power supply, 3.3 v (typical) 4 v eedid ddc 3.3v power 5 nc reserved for supplier test point 6 clk eedid ddc clock 7 data eedid ddc data 8 rin0 - - lvds differential data input (r0 - r5, g0) (odd pixels) 9 rin0+ + lvds differential data input (r0 - r5, g0) (odd pixels) 10 vss ground 11 rin1 - - lvds differential data input (g1 - g5, b0 - b1) (odd pixels) 12 rin1+ + lvds differential data i nput (g1 - g5, b0 - b1) (odd pixels) 13 vss ground 14 rin2 - - lvds differential data input (b2 - b5, hs, vs, de) (odd pixels) 15 rin2+ + lvds differential data input (b2 - b5, hs, vs, de) (odd pixels) 16 vss ground 17 clkin - - lvds differential clock inp ut (odd pixels) 18 clkin+ + lvds differential clock input (odd pixels) 19 vss ground 20 nc n o connect 21 nc no connect 22 nc no connect 23 nc no connect 24 nc no connect 25 nc no connect 26 nc no connect 27 nc no connect 28 nc no connect 29 n c no connect 30 nc no connect ? note 1 ? relation between lvds signals and actual data shows below section (4 - 2). ? note 2 ? the shielding case is connected with signal gnd. free datasheet http://www..net/
qd15 t l 0203 page /26 6 quanta display inc . 4 - 2 interface block diagram using receiver : ds90cf364(national semiconductor ) corresponding transm itter : ds90c363,ds90c383(national semiconductor ) txin12 ~ 17 txin 0 ~ 5 txin 6 ~ 11 r0 ~ r5 b0 ~ b5 hsync vsync enab g0 ~ g5 rxi n0+ (6) rxin0 - (5) txin18 txin19 txin20 6 6 6 controller ttl parallel - to - lvds pll ds90c*363 lvds - to - parallel ttl pll ds90cf364 rxin1+ (9) rxin1 - (8) rxin2+ (12) rxin2 - (11) rxclkin+ (1) rxclkin - (14)(14) 6 6 6 rxout12 ~ 17 rxout18 rxout19 rxout20 rx out0 ~ 5 rxout6 ~ 11 r0 ~ r5 b0 ~ b5 hsync vsync enab g0 ~ g5 internal circuits rxclk out ck clk txclk in ( computer side ) ( tft - lcd side ) free datasheet http://www..net/
qd15 t l 0203 page /26 7 quanta display inc . 4 - 3. backlight driving cn2: bhsr - 02vs - 1(jst) mating connector: sm02b - bhss - 1 - tb (jst) or 87210 - 0200 pin no. symbol function 1 v high power supply for lamp (high voltage sid e) 2 v low power supply for lamp (low voltage side) 5. absolute maximum ratings 5 - 1 lcd module parameter symbol condition ratings unit remark input voltage v i ta=25 ? - 0.3 ~ v dd +0.3 v ? note1 ? +3.3v supply voltage v dd ta=25 ? 0 ~ + 4 v stora ge temperature tstg - - 25 ~ + 60 ? ? note2 ? operating temperature (ambient) topa - 0 ~ + 50 ? ? note1 ? lvds signals ? note2 ? humidity : 95%rh max. at ta ? 40 ? . maximum wet - bulb temperature at 39 ? or less at ta>40 ? . no condensation. 6. electrical characteristics 6 - 1.tft - lcd panel driving ta = 25 ? parameter symbol min. typ. max. unit remark v dd supply voltage v dd +3.0 +3.3 +3.6 v ? note2 ? current dissipation i dd - 420 7 00 ma ? note3 ? permissive input ripple voltage v rp - - 100 mv p - p vcc=+3.3v differential input high v th - - +100 mv v cm =+1.2v threshold voltage low v tl ? 100 - - mv ? note1 ? terminal resistor r t - 100 - o differential input rush current i rush 1.5 a rise time 470us ? note1 ? v cm : common mode voltage of lvds driver. ? note2 ? on - off conditions for supply voltage 0 .5 < t1 ? 10 ms 0 < t2 ? 50 ms 0 < t3 ? 50 ms 400 ms ? t4 200 ms ? t5 200 ms ? t6 ccfl data vdd t1 t2 t3 t4 t5 t6 90% 90% 10% 10% 10% free datasheet http://www..net/
qd15 t l 0203 page /26 8 quanta display inc . vcc - dip conditions 1) 2.5 v ? vcc < 3.0 v td ? 10 ms 2) vcc < 2.5 v vcc - dip conditions should also follow the on - off conditions for supply voltage ? note3 ? test pattern of current dissipation [full white pattern] vdd=+3.3v [full black pattern] vdd=+3.3v r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b [1 line on/off pattern] vdd=+3.3v [1 dot on/off pattern] vdd=+3.3v r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b [32x32 mosaic pattern] vdd=+3.3v t d v cc 2.5v 3.0v free datasheet http://www..net/
qd15 t l 0203 page /26 9 quanta display inc . 6 - 2. backlight driving the backlight system is an edge - lighting type with single ccft (cold cathode fluorescent tube). the characteristics of the lamp are shown in the following table. parameter symbol min. typ. max. unit remark lamp current range i l 3.0 6.0 6.5 marms ? note1 ? lamp voltage v l 657 730 803 vrms lamp power consumption p l - 4.38 - w i l = 6.0ma ? note2 ? lamp frequency f l 54 60 66 khz ? note3 ? kick - off voltage vs - - 1460 vrms ta=25 ? - - 1650 vrms ta=0 ? ? note4 ? lamp life time l l 15 000 - - hour ? note5 ? ? note1 ? lamp current is measured with current meter for high frequency as shown below. ? note2 ? calculated value for reference ( i l v l ) ? note3 ? lamp frequency may produce interference with horizontal synchronous frequency, and this may cause beat on the display. therefore lamp frequency shall be detached as much as possible from the horizontal synchronous frequency and from the harmonics of horizo ntal synchronous to avoid interference. ? note4 ? the voltage above this value should be applied to the lamp for more than 1 second to start - up. otherwise the lamp may not be turned on. ? note5 ? lamp life time is defined as the time when either ? or ? occurs in the continuous operation under the condition of ta = 25 ? and i l = 6.0 marms. ? brightness becomes 50 % of the original value under standard condition. ? kick - off voltage at ta = 0 ? exceeds maximum value. ( note) the performance of the backlight, for example life time or brightness, is much influenced by the characteristics of the dc - ac inverter for the lamp. when you design or order the inverter, please make sure that a poor lighting caused by the mismatch of the backlight and the inverter (miss - lighting, flicker, etc .) never occur. when you confirm it, the module should be operated in the same condition as it is installed in your instrument. module 1 2 inverter a free datasheet http://www..net/
qd15 t l 0203 page /26 10 quanta display inc . 7. timing characteristics of lcd module input signals 7 - 1. timing characteristics (this is specified at digital output s of lvds driver.) ( vertical ) item ( symbol ) min. typ. max. unit remark vsync cycle (t va ) - 16.667 - ms negative 80 8 816 850 line blanking period(t vb ) 8 16 - line sync pulse width (t vc ) 2 4 - line back porch (t vd ) 5 8 - line sync pul se width + back porch (t vc +t vd ) 7 12 - line active display area (t ve ) 800 800 800 line front porch (t vf ) 1 4 - line ( horizontal ) item ( symbol ) min. typ. max. unit remark hsync cycle (t ha ) - 20.44 - s negative 1380 1408 1428 clock blanking pe riod (t hb ) 100 128 - clock sync pulse width (t hc ) 16 32 - clock back porch (t hd ) 68 75 - clock sync pulse width + back porch (t hc +t hd ) 84 107 - clock active display area (t he ) 1280 1280 1280 clock front porch (t hf ) 16 21 - clock ( clock ) item min. typ. max. unit remark frequency 67.0 68. 9 72.0 mhz ? note1 ? note) in case of lower frequency, the deterioration of display quality, flicker etc., may be occurred. data enab sync b c a d e f free datasheet http://www..net/
qd15 t l 0203 page /26 11 quanta display inc . 7 - 2 . input data signals and display position on the screen d1, dh1 d2, dh1 d1, dh2 d2, dh2 d3, dh1 d1,dh800 d1280,d h1 d 1280 ,dh 800 r g b free datasheet http://www..net/
qd15 t l 0203 page /26 12 quanta display inc . 8. inpu t signals, basic display colors and gray scale of each color colors & data signal gray scale gray scale r0 r1 r2 r3 r4 r5 g0 g1 g2 g3 g4 g5 b0 b1 b2 b3 b4 b5 black - 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 blue - 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 g reen - 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 cyan - 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 red - 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 magenta - 1 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 1 yellow - 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 white - 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 black gs0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ? gs1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 darker gs2 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ? ? ? ? ? ? ? ? ? ? brighter gs61 1 0 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 ? gs62 0 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 red gs63 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 black gs0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ? gs1 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 darker g s2 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 ? ? ? ? ? ? ? ? ? ? brighter gs61 0 0 0 0 0 0 1 0 1 1 1 1 0 0 0 0 0 0 ? gs62 0 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 green gs63 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 black gs0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ? gs1 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 darker gs2 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 ? ? ? ? ? ? ? ? ? ? brighter gs61 0 0 0 0 0 0 0 0 0 0 0 0 1 0 1 1 1 1 ? gs62 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 blue gs63 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 0 : low level voltage, 1 : high level voltage each basic color can be displayed in 64 gray scales from 6 bit data signals. according to the combination of total 18 bit data signals, the 262,144 - color display can be achieved on the screen. basic color gray scale of red gray scale of green gray scale of blue free datasheet http://www..net/
qd15 t l 0203 page /26 13 quanta display inc . 9. edid data structure this is the edid (extended display identification data) data format to support displays as defined in the vesa plug & display. byte byte value value (decimal) (hex) field nam e and comments (hex) (binary) header 0 0 header 0 0 0000000 0 1 1 header ff 11111111 2 2 header ff 11111111 3 3 header ff 11111111 4 4 header ff 11111111 5 5 header ff 11111111 6 6 header ff 11111111 7 7 header 0 0 0 0000 000 vender/product id / edid version 8 8 eisa manufacturer code=qds 44 01000100 9 9 eisa manufacturer code(compressed ascii) 93 10010011 10 0a product code ( 3 8 ) lsb 26 00 100 1 1 0 11 0b product code msb 00 00000000 12 0c id (32bit) serial no (zero if not used) 00 00000000 13 0d id (32bit) serial no (zero if not used) 00 00000000 14 0e id (32bit) serial no (zero if not used) 00 00000000 15 0f id (32bit) serial no (zero if not used) 00 00000000 16 10 week of manufacture 00 00000000 17 11 year o f manufacture ? 1990 (ex. 200 5 - 1990=1 5 ) 0f 00001111 18 12 edid structure version # = 1 01 00000001 19 13 edid revision # = 3 03 00000011 display parameter 20 14 video i/p definition = digital i/p 80 10000000 21 15 max h image size (cm) =33cm 21 00100 001 22 16 max v image size (cm) =21cm 15 00010101 23 17 display gamma ( 2.2100 ) ? 100 78 01111000 24 18 features (no dpms,active off,rgb,timing blk1) 0 a 00001010 panel color coordinates 25 19 red/green low bits (rxry/gxgy) 4d 01001101 26 1a blue/whi te low bits (bxby/wxwy) c0 11000000 27 1b red x rx=0.576 93 10010011 28 1c red y ry=0.3 60 5c 01011100 29 1d green x gx=0.3 20 51 01010001 free datasheet http://www..net/
qd15 t l 0203 page /26 14 quanta display inc . 30 1e green y gy=0.533 88 10001000 31 1f blue x bx=0.156 2 7 0010 0111 32 20 blue y by=0.129 21 00100 001 33 21 white x wx=0.313 50 01010000 34 22 white y wy=0.329 54 01010100 established timings 35 23 established timings 1 (00h if not used) 00 00000000 36 24 established timings 2 (00h if not used) 00 00000000 standard timing id 37 25 manufactur er?s timings( 00h if not used) 00 00000000 38 26 standard timing id1 (01h if not used) 01 00000001 39 27 standard timing id1 (01h if not used) 01 00000001 40 28 standard timing id2 (01h if not used) 01 00000001 41 29 standard timing id2 (01h if not us ed) 01 00000001 42 2a standard timing id3 (01h if not used) 01 00000001 43 2b standard timing id3 (01h if not used) 01 00000001 44 2c standard timing id4 (01h if not used) 01 00000001 45 2d standard timing id4 (01h if not used) 01 00000001 46 2e stan dard timing id5 (01h if not used) 01 00000001 47 2f standard timing id5 (01h if not used) 01 00000001 48 30 standard timing id6 (01h if not used) 01 00000001 49 31 standard timing id6 (01h if not used) 01 00000001 50 32 standard timing id7 (01h if n ot used) 01 00000001 51 33 standard timing id7 (01h if not used) 01 00000001 52 34 standard timing id8 (01h if not used) 01 00000001 53 35 standard timing id8 (01h if not used) 01 00000001 timing descriptor #1 54 36 pixel clock(68.9m)/10,000 (lsb) ea 11101010 55 37 pixel clock(68.9m)/10,000 (msb) 1a 00011010 56 38 horizontal active=1280 pixels (lower 8 bits) 00 00000000 57 39 horizontal blanking=128 pixels (lower 8bits) 80 10000000 58 3a horizontal active: horizontal blanking (upper 4:4 bits ) 50 01010000 59 3b vertical active =800 lines (lower 8bits) 20 00100000 60 3c vertical blanking=16 lines (lower 8bits) 10 00010000 61 3d vertical active : vertical banking (upper 4:4 bits) 30 00110000 62 3e horizontal sync.offset =21 pixels 15 0 0010101 63 3f horizontal sync.width=32 pixels 20 00100000 64 40 vertical sync. offset: lines sync. width 44 01000100 65 41 horizontal/vertical sync offset/width upper 2 bits 00 00000000 free datasheet http://www..net/
qd15 t l 0203 page /26 15 quanta display inc . 66 42 horizontal image size=331.2mm (lower 8 bits) 4b 01001011 67 43 vertical image size=207mm (lower 8 bits) cf 11001111 68 44 horizontal : vertical image size (upper 4:4 bits) 10 00010000 69 45 horizontal border (zero for internal lcd) 00 00000000 70 46 vertical border (zero for i nternal lcd) 00 00000000 71 47 non - interlaced,normal,no stereo,separate sync,h/v pol negatives 18 00011000 timing descriptor #2 manufacturer specified range timing descriptor 72 48 flag 00 00000000 73 49 flag 00 00000000 74 4a flag 00 00000000 75 4b data type tag: descriptor defined by manufacturer 0f 00001111 76 4c flag 00 00000000 77 4d value=hspw min/2 (pixel clks) 08 00001000 78 4e value=hspw max/2 (pixel clks) 0 0 00000000 79 4f value=thbp min/2 (pixel clks) 2a 00101010 80 50 value=thbp m ax/2 (pixel clks) 0 0 00000000 81 51 value=vspw min/2 (line pulses) 01 00000001 82 52 value=vspw max/2 (line pulses) 0 0 00000000 83 53 value=tvbp min/2 (line pulses) 0 4 00000100 84 54 value=tvbp max/2 (line pulses) 0 0 00000000 85 55 thp min= value*2+ha pixel clks (pixel clks) 32 00110010 86 56 thp max=value*2+ha pixel clks (pixel clks) 4a 01001010 87 57 tvp min=value*2+va lines 0 4 00000100 88 58 tvp max=value*2+va lines 14 00010100 89 59 module revision 0 1 00000001 timing descriptor #3 : ascii string : supplier name 90 5a flag 00 00000000 91 5b flag 00 00000000 92 5c flag 00 00000000 93 5d data type tag : module serial number fe 11111110 94 5e flag 00 00000000 95 5f ascii (q) 51 01010001 96 60 ascii (u) 55 01010101 97 61 ascii (a) 41 01000001 98 62 ascii (n) 4e 01001110 99 63 ascii (t) 54 01010100 100 64 ascii (a) 41 01000001 101 65 ascii (d) 44 01000100 102 66 ascii (i) 49 01001001 free datasheet http://www..net/
qd15 t l 0203 page /26 16 quanta display inc . 103 67 ascii (s) 53 01010011 104 68 ascii (p) 50 01010000 105 69 ascii (l) 4c 01001100 106 6a ascii (a) 41 01 0 0 0001 107 6b ascii (y) 59 01011001 timing descriptor #4 ascii string : supplier p/n 108 6c flag 00 00000000 109 6d flag 00 00000000 110 6e flag 00 00000000 111 6f data type tag : module name fe 11111110 112 70 flag 00 000000 00 113 71 q 51 01010001 114 72 d 44 01000100 115 73 1 31 00110001 116 74 5 35 00110101 117 75 t 54 01010100 118 76 l 4c 01001100 119 77 0 30 00110000 120 78 2 32 00110010 121 79 product revision rev . 3 3 3 001100 1 1 122 7a terminate with ascii code 0ah 0a 00001010 123 7b pad field with ascii code 20h 20 00100000 124 7c pad field with ascii code 20h 20 00100000 125 7d pad field with ascii code 20h 20 00100000 126 7e extension flag 00 00000000 127 7f checksum ad 101 0110 1 free datasheet http://www..net/
qd15 t l 0203 page /26 17 quanta display inc . 10. optica l characteristics ta=25 ? , vcc=+3.3v parameter symbol condition min. typ. max. unit remark viewing horizontal r , l cr>10 - 45 - deg. ? note1,4 ? angle vertical up - 15 - deg. range dn - 35 - deg. contrast ratio cr n ? =0 300 400 - ? note2,4 ? response rise t r ? =0 - 5 - ms ? note3,4 ? time decay t d - 20 - ms chromaticity of w x 0.2 83 0.3 13 0.3 43 ? note4 ? white w y 0. 299 0.3 29 0.3 59 chromaticity of red rx ry 0.546 0.330 0.576 0.360 0.606 0.390 chromaticity of green gx gy 0.290 0.503 0.320 0.533 0.350 0.563 c hromaticity of blue bx by 0.126 0.099 0.156 0.129 0.186 0.159 luminance of white ? note5 ? yl2 5 points avg. 130 160 - cd/m 2 il = 6.0 marms f l = 55 khz white uniformity dw 5 points - - 1.4 ? note5 ? the optical characteristics shall be measured in a dark r oom or equivalent state with the method shown in fig.3. ? note1 ? definitions of viewing angle range: field=2 o photodetector (bm - 5a: topcon) 400 mm tft - lcd module lcd panel center of th e screen fig 3. optical characteristics measurement method free datasheet http://www..net/
qd15 t l 0203 page /26 18 quanta display inc . ? note2 ? definition of contrast ratio: the contrast ratio is defined as the following. contrast ratio (cr) = ? note3 ? definition of response time: the response time is defined as the following figure and shall be measured by switching the input signal for "black" and "white" . ? note4 ? this shall be measured at center of the screen. ? note5 ? definition of white uniformity: maximun luminance of 5 points d w = minimum luminance of 5 points *1) 5 points are a,b,c,d,e luminance (brightness) with all pixels white luminance (brightness) with all pixels black normal direction 6 o ? clock direction l r up dn 100 % 90% 10% 0% n r n d white black white time photodetector output (relative value) a b d e c 1/4h 1/4h 1/4h 1/4v 1/4v 1/4v 1/4v h v 1/4h free datasheet http://www..net/
qd15 t l 0203 page /26 19 quanta display inc . 1 1 . display quality the display quality of the color tft - lcd module shall be in compliance with the incoming inspection standard. 1 2. handling precautions a) be sure to turn off the power supply when inserting or disconnecting the cable. b) be sure to design the cabinet so that the module can be installed without any extra stress such as warp or twist. c) since the front polarizer is easily damaged, pay attention not to scratch it. d) wipe off water drop immediately. long contact with water may cause discoloration or spots. e) when the panel surface is soiled, wipe it with absorbent cotton or other soft cloth. f) since the panel is made of glass, it may break or crack if dropped or bumped on hard surface. handle with care. g) since cmos lsi is used in this module, take care of static electricity and in jure the human earth when handling. h) observe all other precautionary requirements in handling components. i) this module has its circuitry pcbs on the rear side and should be handled carefully in order not to be stressed. j) laminated fil m is attached to the module surface to prevent it from being scratched. peel the film off slowly just before the use with strict attention to electrostatic charges. ionized air shall be blown over during the action. blow off the 'dust' on the polarizer by using an ionized nitrogen gun, etc.. k ) mounting screw hole can stand torque 1.3~1.5 kgf - cm. free datasheet http://www..net/
qd15 t l 0203 page /26 20 quanta display inc . 13. reliability test items no. test item conditions 1 high temperature storage test ta = 60 ? 240h 2 low temperature storage test ta = - 25 ? 240h 3 high temperature & high humidity operation test ta = 40 ? ; 90 %rh 240h ; (as remark #3 ) (no condensation) 4 high temperature operation test ta = 50 ? 240h (the pan el temp. must be less than 60 ? ) 5 low temperature operation test ta = 0 ? 240h 6 vibration test (non - operating) frequency: 10 ~ 500hz, 1.5g, test period : 3 hours (1 hour for each direction of x,y,z) 7 shock test (non - operatin g) max. gravity: 220 g pulse width: 2 ms, half sine wave direction : x, y, z once for each direction. remark: (1) a failure is defined as the appearance of pixel failured on any color layer or the appearance of horizontal or vertical lines, bars etc. (2) low temperature storage ? panel must return to operating temperature range prior to activation.? (3) hi temperature / humidity test max. wet - bulb temperature is less than 39 o c ; at glass temperature high than 40 o c. temperature and relative humidity range is shown in the figure below. storage range 0 20 40 60 temperature ( o c) 80 - 60 - 40 - 20 operating range 20 40 60 80 100 relative humidity (% rh) free datasheet http://www..net/
qd15 t l 0203 page /26 21 quanta display inc . 14. others 1) lot no. label: 2) adjusting volume has been set optimally before shipment, so do not change any adjusted value. if adjusted value is changed, the s pecification may not be satisfied. 3) disassembling the module can cause permanent damage and should be strictly avoided. 4) please be careful since image retention may occur when a fixed pattern is displayed for a long time. 5) if any problem occurs in relation to the description of this specification, it shall be resolved through discussion with spirit of cooperation. jfc 1171000001 qd15 t l0 2 rev.0 3 serial number product name serial number bar code 01 free datasheet http://www..net/
qd15 t l 0203 page /26 22 quanta display inc . 15. incoming inspection standard 1) external inspection inspection item criteria accepted c ount (n) d ?? 0.35mm disallow d ?? 0.15mm n ?? 3 d < 0.15mm don?t care black spot, white spot, foreign circular material dent & bubble minimum distance between defects: 10mm l ?? 2.0 disallow scratches , lint l: length; w: width (mm) 0.0 0.01 1/ 4 dot no count: defect area < 1/ 4 dot average diameter : d 2 a + b d = a b l =longest point w length:l l free datasheet http://www..net/
qd15 t l 0203 page /26 23 quanta display inc . (3) bright dots (acceptable) green/red/blue dots : when the module lights, dots appear bright in display at black picture position.(v0) check pattern total quantity black picture position ? 2 *1) 2 a djacent ?? . ? ?????? . ? 1 pair max. * 2) defect distance ? ??????? more than 15mm (4) black dots (acceptable) black dots : when the module lights, dots appear black in display at green+blue+re d picture position. check pattern total green+blue+red picture position three picture position total ? 5 *1) 2 a djacent ?? . ? ?????? ... 2 pair m ax. *2) defect distance ? ??????? more than 5mm . *3) three joined bright /black dots must be nil . (5) total dot defect ( black & bright ) total dot defects : it is possible if accept count is the counts of bright and dark dots . check pattern total quantity ? 5 3) display non - uniformity there should be no distinct non - uniformity visible through 5 m (ndf) transparency of filter. viewing distance : 35cm ambient illumination : 300 to 700 lux(standard 500 lux) ambient temperature : 20 - 25 ? light source condition : based on the specification. note ) : viewing angle : the surface of the module and the eyes of the inspector shall be 90 degrees. 4) others if some problems arise about mentioned items in this document and other items, the user of the tft - lcd module and qdi will cooperate and make efforts to solve the problems with mutual respect an d good will. free datasheet http://www..net/
qd15 t l 0203 page /26 24 quanta display inc . bright dot defect standard reference accept sample reject sample dark dot defect standard reference accept sample reject sample a1 a2 a3 a4 a5 a7 a6 a8 r1 r2 r3 r4 r5 a7 a6 a8 a1 a2 a3 a4 a5 r1 free datasheet http://www..net/
qd15 t l 0203 page /26 25 quanta display inc . 16. mechanical outline dimension free datasheet http://www..net/
qd15 t l 0203 page /26 26 quanta display inc . free datasheet http://www..net/

▲Up To Search▲

Price & Availability of QD15TL02

	To Download QD15TL02 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .